TL80VP

Weight

8,955 lbs

HorsePower

71.5 hp

ROC

2,800 lbs

Power for Demanding Jobsites

Designed for contractors who need greater lifting capability without compromising flotation or ride quality, the TL80VP combines powerful hydraulics with an advanced ASV Posi-Track® dual-level suspended torsion-axle undercarriage. From construction and agriculture to commercial sitework, it delivers confident performance where productivity matters most.

Choose a loader around the work ahead

The Yanmar TL80VP is an option for Alberta contractors planning loading, site preparation, and material-handling work. Compare the machine’s capacity, operating footprint, and attachment requirements with the conditions on your site before choosing a configuration.

Weight: 8,955 lbs; HorsePower: 71.5 hp; ROC: 2,800 lbs. Review the detailed specifications below and talk with Emerald Equipment in Edmonton or Calgary about availability, pricing, and support for your application.

Equipment support in Alberta

Ask about pricing and configuration · Equipment parts · Heavy equipment repair and service

Features

Powering Demanding Attachments

The 34.3-gpm high-flow hydraulics provides the TL80VP with the capability to operate demanding attachments efficiently. Direct-drive hydraulic motors transfer power effectively, while an advanced cooling system is engineered to run at full load, 100% of the time, in ambient temperatures up to 118°F.

Smoother By Design

The ASV Posi-Track® undercarriage features dual-level suspension to maintain ground contact, improve traction and smooth out travel over rough terrain. Standard 17.7-inch wide tracks provide added flotation across soft or uneven ground.

Comfort That Keeps Up

A spacious cab, suspended seat and adjustable armrests help reduce operator fatigue throughout the day. The standard rearview camera and available LED side lights and clear side glass improve jobsite awareness. SmartAssist Remote telematics comes standard and gives owners convenient access to important machine information.

Specifications

Operating Specifications

Loader Arms: Vertical
Operating Weight (Open ROPS): 8,955 lbs / 4,062 kg
Operating Weight (Enclosed Cab): 9,295 lbs / 4,216 kg
Ground Pressure at Operating Weight: 3.9 psi / 26.9 kPa
Rated Operating Capacity (35% of Tipping Weight): 2,800 lbs / 1,270 kg
Operating Capacity (50% of Tipping Weight): 4,000 lbs / 1,814 kg
Tipping Weight: 8,000 lbs / 3,629 kg
Travel Speed, Maximum: 9.1 mph / 14.6 km/h

Auxiliary Hydraulic System

Auxiliary Hyd. Flow, Standard: 24.7 gpm / 93.5 lpm
Auxiliary Hyd. Flow, High: 34.3 gpm / 129.8 lpm
Auxiliary Hyd. Pressure, Standard: 3,481 psi / 24,000 kPa
Auxiliary Hyd. Pressure, High: 3,771 psi / 26,000 kPa
Controls: Variable flow via joystick rocker switch, or continuous via console switch
Couplers: Flat Faced Couplers: 1/2 in.
Cooling System: High efficiency side-by-side radiator and oil cooler, not stacked
Quick-Attach Mounting Plate: Universal standard skid steer quick attach coupler with manual or hydraulic latching pins

Engine

Type: Diesel, 4-cylinder, turbocharged
Model: Yanmar 4TN86CHT
Gross Power Rating: 71.5 hp / 53.3 kW
Displacement: 128.1 cu in / 2.1 L
Torque, Peak: 193.8 ft-lb / 262.8 Nm
Cooling System Type and Capacity: Belt-driven fan and anti-freeze filled radiator cooling
Intake Air Cleaner: Dual stage
Emission Controls: Meets all U.S. EPA Tier 4 final standards
Standard Features: Engine block heater

Undercarriage

Track Type: General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads
Track Width: 17.7 in. / 450 mm
Length of Track on Ground: 64.5 in. / 1,638 mm
Ground Contact Area: 2,283 in.² / 1.47 m²
Drive System: Direct drive hydrostatic pumps powering two direct drive sprocket motors controlled by selectable electronic ISO/H-pattern joysticks
Undercarriage Suspension: Advanced dual level suspension, two independent torsion axles combine with two independent torsion bogie wheels per undercarriage
Roller Wheels: 12 ultra-high molecular weight polyethylene and rubber wheels per track, wheels include metal-face sealed bearings

Service Capacity

Fuel Tank: 21.4 gal / 81 L
DEF Capacity: N/A

Electrical System

Nominal Charge: 12 V
Battery: 800 CCA
Charging System: 80 amp alternator
Outlets: 1-12 V port inside operator station
Wiring: Pre-wired for all factory-available accessories

Operator Station

Cab: Open Rops Base, Open Rops Premium Plus Hydraulics, All Weather Cab Premium, All Weather Cab Pemium Plus Hydraulics, Forestry
Seat: Standard mechanical suspension seat, single sided lap bar and 2 in. wide seat belt / Standard mechanical suspension seat, single sided lap bar and 51 mm wide seat belt
Controls: Electronic joystick controls with ISO or H pattern settings, adjustable operator profiles and speeds
Machine Display: Multi-functional color 7 inch display/indicator: Engine RPM, engine coolant temperature, engine oil pressure, hydraulic oil temperature, battery voltage, hour meter, fuel level, trip meter, engine diagnostics, system monitoring, fault logging, integrated rear view camera, password protection with user profiles, job clock, maintenance schedules
Engine Speed Control: Hand-operated dial, foot throttle optional
ROPS: Meets ISO 3471
FOPS: Meets ISO 3449
Operator Restraint Anchorage: Meets ISO 6683 CAL OSHA 1596
Illumination: 2 fixed forward-facing LED lights; 2 adjustable rear-facing LED lights; 2 fixed red rear-facing LED lights; 1 interior light
Standard Features: Horn, backup alarm, roof panel, rear window, rear view camera, cup holder, two speed, standard flow, adjustable joystick, SmartAssist Remote telematics
Optional Features: All weather cab with heat and air conditioning, foot throttle, phone holder, radio with Bluetooth and USB, roof insulation, high flow aux hydraulics, air ride seat, LED side lights (Open Rops), 1/2 in. polycarbonate door, hyd Q/A, 4 pin attachment control, dual direction bucket positioning, return to position, ride control